The uAPAX30H is a ceiling-mount Wi-Fi 6 access point with a dual-mode XPON (GPON / EPON) uplink and Power over Fiber (PoF). A single PoF optical-electric composite cable from the SP-POF splitter carries both the optical signal and DC power to the unit — over runs of up to 1,000 m (3,280 ft) — so no local outlet is needed at the ceiling; dual-band Wi-Fi 6 AX3000 and one Gigabit Ethernet port serve the room below.
Powered from the SP-POF splitter over the composite cable, on runs of up to 1,000 m (3,280 ft) — no local outlet needed at the ceiling, and power and optical transmission do not interfere with each other. A 12 V DC local input is also provided.
802.11ax on both bands with 160 MHz channels, MU-MIMO and OFDMA, for up to 256 connected devices — built-in antennas keep the ceiling profile clean.
195 × 195 × 35 mm and 400 g, with built-in Wi-Fi antennas for a clean ceiling installation in lobbies, classrooms and conference rooms.
OAM / OMCI management with compatible OLT platforms, plus TR-069, Web and Telnet — the AP is run like the rest of the PON.
Wi-Fi 6 coverage for hotel lobbies and restaurants from a low-profile ceiling unit.
Wi-Fi 6 with MU-MIMO and OFDMA for dense classrooms, with up to 256 connected devices.
Ceiling-mount Wi-Fi 6 and a Gigabit port for wired devices, powered over the fiber drop.
IPv4/IPv6 dual stack and Layer 3 functions for business access on the PON.
| PON interface | |
| Port | 1× XPON with PoF — GPON Class B+ / EPON PX20+ |
|---|---|
| Connector | PoF optical-electrical composite port, single-mode |
| Wavelength | TX 1310 nm, RX 1490 nm |
| TX optical power | 0 to +4 dBm |
| RX sensitivity | −27 dBm |
| Overload optical power | −8 dBm (GPON) · −3 dBm (EPON) |
| Transmission distance | 20 km |
| User interfaces | |
| Ethernet | 1× GE RJ45, auto-negotiation |
| Button / indicators | Reset button; PON/LOS and LAN indicators |
| Wi-Fi | |
| Standards | IEEE 802.11b/g/n/ax @ 2.4 GHz; IEEE 802.11a/n/ac/ax @ 5 GHz |
| Data rate | AX3000 — 574 Mbps @ 2.4 GHz + 2,402 Mbps @ 5 GHz |
| Channel bandwidth | Up to 160 MHz |
| MIMO | 2.4 GHz 2×2; 5 GHz 2×2 |
| Antennas | Internal; 5 GHz uses 3 antennas (2 for data, 1 for spatial calibration) |
| Max. connected devices | 256 |
| Power | |
| PoF power input | 44–57 V DC via PoF optical-electrical composite cable |
| Local power input | 12 V DC / 1.5 A, external AC-DC adapter (optional) |
| Power consumption | ≤18 W |
| Physical & environmental | |
| Dimensions (L × W × H) | 195 × 195 × 35 mm |
| Net weight | 400 g |
| Installation | Ceiling mount |
| Operating environment | −10 °C to +55 °C; 5%–95% RH, non-condensing |
| Storage environment | −40 °C to +70 °C; 5%–95% RH, non-condensing |
| Software (summary) | |
| Management | Web, Telnet, OAM / OMCI, TR-069 |
| Layer 3 | IPv4 / IPv6 dual stack; DHCP, PPPoE and static IP; static routing, NAT, DMZ, ALG, UPnP, virtual server, DDNS |
| Security | WPA / WPA2 / WPA3 Personal, WPS 2.0; IP / MAC and URL filtering; anti-DoS; loop detection; parental control |
| Wi-Fi features | MU-MIMO and OFDMA; multiple SSIDs; hidden SSID; Mesh System |
Source: UGRID-DS-uAPAX30H-R01 datasheet (full software feature list in the PDF).
The uAPAX30H is fed from a UGrid U5 or U8 OLT through an SP-POF PoF power splitter, which delivers the optical signal and DC power together over the PoF composite cable to the ceiling — a powered reach of up to 1,000 m (3,280 ft). The AP then serves PCs over its Gigabit port and wireless clients over Wi-Fi 6. See the system on the Power over Fiber overview.
Optional accessory: 12 V DC / 1.5 A AC-DC power adapter for local power. Need the splitter that feeds it? See the SP-POF ordering information.
No. It is powered at 44–57 V DC over the PoF optical-electrical composite cable from an SP-POF splitter — on runs of up to 1,000 m (3,280 ft) — and consumes ≤18 W. A 12 V DC local power input is also provided if local power is preferred.
Yes. Its uplink is dual-mode XPON: GPON (Class B+) or EPON (PX20+), over a single-mode composite port rated for 20 km.
Up to 256 connected devices, across dual-band Wi-Fi 6 AX3000 (574 Mbps at 2.4 GHz + 2,402 Mbps at 5 GHz) with 160 MHz channels, MU-MIMO and OFDMA.
By OAM / OMCI with compatible OLT platforms, and by TR-069, Web or Telnet — with IPv4/IPv6 dual stack, multiple SSIDs and WPA / WPA2 / WPA3 Personal security.
It is a ceiling-mount unit for indoor spaces — hotel lobbies, restaurants, classrooms and conference rooms — operating from −10 °C to +55 °C at 195 × 195 × 35 mm and 400 g.
Tell us the rooms to cover and the OLT the APs will hang off — our team typically responds within 2 business days.
Request a QuoteNew to Power over Fiber? Read the PoF solution guide — how the system works and how PoF compares with PoE.
