The FiberTrix-24 is a 1U rackmount PON MDU (multi-dwelling unit) whose PON SFP slot runs GPON, XG-PON or XGS-PON by the module inserted — delivering 24 Gigabit Ethernet ports with IEEE 802.3af/at PoE+ and a 370 W budget to buildings and cabinets.
One SFP slot, three PON generations: order with a GPON, XG-PON or XGS-PON ONU module — the hardware is identical, the mode follows the module, 20 km reach.
All 24 Gigabit ports supply IEEE 802.3af/at PoE+ at up to 30 W from the internal AC supply — a full floor of cameras, APs and phones off one fiber drop.
16K MAC addresses, 4,072 VLANs with translation and QinQ, port and protocol VLANs, LACP, RSTP and MSTP, port isolation and storm control.
Static routing and IPv6, plus a built-in DHCP server, relay and snooping with Option 82 and DHCPv6 — the MDU can run the building's access layer on its own.
L2–L4 ACL traffic filtering, IEEE 802.1X and AAA with RADIUS and TACACS+ authentication.
OMCI from the OLT, plus Telnet, CLI, Web and SSH v2 locally; TFTP file transfer, NTP, system log and alarm management.
One PON drop per floor or riser: the FiberTrix-24 serves 24 powered Gigabit ports to units, offices and building systems from a single 1U box.
Fiber to the office and the desk — eight PoE+ ports at the workspace for IP phones, PCs and wireless APs, on GPON or EPON alike.
Every port supplies PoE+ up to 30 W, so cameras and APs power straight off the fiber drop — no local power supplies to install or maintain.
Every value below is from the official FiberTrix-24 datasheet (R01).
| PON interface | |
| PON port | 1× SFP slot — GPON, XG-PON or XGS-PON according to the ONU optical module inserted |
|---|---|
| Supplied ONU module | G model: GPON ONU SFP · XG model: XG-PON ONU SFP+ · XGS model: XGS-PON ONU SFP+ |
| Line rate (up / down) | GPON 1.244 / 2.488 Gbps · XG-PON 2.488 / 9.953 Gbps · XGS-PON 9.953 / 9.953 Gbps |
| Wavelength | GPON: TX 1310 nm, RX 1490 nm · XG(S)-PON: TX 1270 nm, RX 1577 nm |
| TX optical power | GPON +0.5 to +5 dBm · XG-PON +2 to +7 dBm · XGS-PON +4 to +9 dBm |
| RX sensitivity | −28 dBm |
| Overload optical power | −8 dBm |
| Transmission distance | 20 km |
| Standards | ITU-T G.984 (GPON), G.987 (XG-PON), G.9807.1 (XGS-PON) |
| Ports & performance | |
| User ports | 24× GE RJ45, 10/100/1000 Mbps auto-negotiation — all PoE / PoE+ |
| Management ports | 1× console, 1× AUX (RJ45) |
| Switching capacity | 90 Gbps |
| MAC address table | 16K |
| Software | |
| Management | Telnet, CLI, Web, SSH v2; TFTP file transfer, NTP, system log, alarm management, OMCI |
| Layer 2 | 4,072 VLANs; VLAN translation and QinQ; port / protocol VLAN; LACP; IEEE 802.1D STP, 802.1w RSTP, MSTP; port isolation; storm control; port rate limiting |
| Layer 3 | Static routing; IPv6 with SLAAC, IPv6 Telnet / HTTPS |
| DHCP | DHCP server, relay and snooping, Option 82; DHCPv6 server and relay |
| Security | L2–L4 ACL traffic identification and filtering; IEEE 802.1X and AAA; RADIUS and TACACS+ |
| QoS | Based on port, VID, ToS and MAC address |
| Multicast | IGMP v1/v2, IGMP snooping and IGMP proxy, up to 1K groups; MLD v1/v2 snooping |
| Power & physical | |
| Power supply | AC 100–240 V (rated 110 V / 220 V), 1× AC; 600 W supply rating |
| Max. power consumption | ≤400 W |
| PoE | IEEE 802.3af / 802.3at on all 24 ports, 30 W per port, 370 W total budget |
| Dimensions (L × W × H) | 442 × 216.2 × 43.6 mm — 1U, 19-inch |
| Weight | 3.2 kg |
| Operating temperature | −30 °C to +60 °C; 5%–95% RH, non-condensing |
| Storage temperature | −40 °C to +85 °C |
The FiberTrix-24 follows its SFP module across GPON, XG-PON and XGS-PON and is OMCI-managed from the OLT — standards-based on ITU-T G.984, G.987 and G.9807.1.
1U PON MDU with PoE+ on every GE port. The part numbers share the same hardware — the PON mode follows the ONU optical module supplied. Contact UGrid to confirm the configuration for your OLT and ODN.
Only need 8 ports at a desk? See the FiberTrix-8 ordering information.
Same job at two scales — the desktop FiberTrix-8 for a workspace or small site, the 1U FiberTrix-24 for a building or cabinet. Full details on the FiberTrix-8 page and the FiberTrix-24 page.
| FiberTrix-8 | FiberTrix-24 | |
|---|---|---|
| PON | XPON dual mode — GPON / EPON | PON SFP slot — GPON / XG-PON / XGS-PON by module |
| User ports | 8× GE, all PoE+ | 24× GE, all PoE+ |
| PoE budget | 54 V DC adapter, ≤130 W supply | 370 W total, AC powered |
| Form factor | Desktop, 205 × 125 × 28 mm | 1U 19-inch, 442 × 216.2 × 43.6 mm |
| Operating temperature | −10 °C to +55 °C | −30 °C to +60 °C |
Its single PON SFP slot takes an ONU optical module, and the PON mode follows the module inserted: GPON, XG-PON or XGS-PON. The three part numbers — FiberTrix-G-PSW-24, FiberTrix-XG-PSW-24 and FiberTrix-XGS-PSW-24 — share the same hardware and differ in the module supplied.
370 W in total across its 24 Gigabit ports, up to 30 W per port under IEEE 802.3af/at, powered from AC 100–240 V — enough for a full floor of cameras, APs and phones.
90 Gbps switching capacity, a 16K MAC table, 4,072 VLANs with translation and QinQ, LACP, RSTP and MSTP, static routing, DHCP server / relay / snooping with Option 82, and IEEE 802.1X with RADIUS / TACACS+ authentication.
It is standards-based (ITU-T G.984, G.987 and G.9807.1) and OMCI-managed for mainstream GPON, XG-PON and XGS-PON OLTs, including UGrid's U10 combo OLT and the U5 / U8 GPON OLTs on GPON.
Tell us the PON flavor, the port count and what the ports have to power — our team typically responds within 2 business days.
Request a Quote